AION Co.,Ltd.

Products ConsumablesWiping

PLAS SENU CLOTH

PLAS SENU CLOTH is a sponge cloth that quickly wipes off water droplets and has a fine pattern on its surface to significantly reduce frictional resistance during wiping.
  • This sponge cloth can wipe off water droplets in an instant. The fine pattern on its surface further reduces frictional resistance during wiping compared to Plas Senu.
  • It works well for window glass and mirrors; wipe off water very quickly and smoothly.

Material

Polyvinyl Alcohol Sponge, Polyester

Size

approx.430x325mm

Quantity

1

Color

BLUE, GREEN, ORANGE

Item No., Color,

Item No., Color, JAN code
501-B BLUE 4905489950128
501-G GREEN 4905489950142
501-O ORANGE 4905489950159

  • Use water to rinse the car body and window glass well.
  • Check that there is no dirt or abrasive dust on them.
  • Before wiping, dip the cloth in water and wring it out well.
  • The cloth’s wiping surface has a fine, uneven pattern and the “AION” mark.
  • To wipe off water, slide the cloth across the surface straight in one direction, not back and forth.
  • Repeat the “wipe and then wring” cycle as wringing out the cloth restores its absorbency.

  • The isothiazolinone preservative contained in this product may cause allergic contact dermatitis.
    Before first use, be sure to rinse the cloth in water well.
  • Use this product only for its intended purpose.
  • The cloth hardens upon drying. Before use, dip the cloth in (warm) water to soften it, and wring it out well.
  • Before use, rinse off any dirt that has adhered to the car body or other surfaces.
  • Leaving dirt and stains adhering to the cloth leads to mold and other problems. After use, rinse the cloth well, wring it out, and then store it in the dedicated case.
  • If the cloth becomes heavily soiled, use soap or neutral detergent to clean it. Do not use bleach because doing so may cause the material to deteriorate.
  • Do not put the cloth in hot water nor leave it in any place where it may be subject to high temperatures or direct sunlight.
  • For disposal, treat it as a combustible according to the procedure specified by your municipality.

FAQs REGARDING OUR CONSUMABLES

Soaking the sponges in water, or if possible lukewarm water, will bring them back to their original softness.

The dealership or retailer selling your Aion products will differ depending on your product use. Please inquire by telephone or via the inquiry page on Aion's website. A sales representative from the relevant business division will get in touch with you.

That depends on how frequently the products are used. If you use a PLAS CHAMOIS product on almost a daily basis, we think it's fine to leave it moistened, but if you aren't going to be using a PLAS CHAMOIS for more than several days, squeeze the water out well, leave the product to dry naturally, and then keep it stored. Keeping a PLAS CHAMOIS product stored moistened can lead to its molding and mildewing.

When moistened in water, our PVA sponge products are soft to the touch and demonstrate advanced moisture-absorbing functionality. For that reason, we offer our PVA sponge products treated with a mold-and-mildew blocker and packaged in the moistened state.
(Though the sponge products become hard when dried, wetting them again will put them back to normal.)

There are no problems with using your washing machine on PLAS CHAMOIS.

Put Sponge-chiefs in a net and there will be no problems with using your washing machine on them.

Use either an oxygen (non-chlorine) bleach or a chlorine bleach on the mold/mildew, ensuring the bleach is at a concentration in line with how bleach should be used, and afterwards rinse out the sponge item with plenty of water. This will not, however, be effective on all mold/mildew stains.

Rub-and-squeeze wash your sponge in water, or rub-and-squeeze wash your sponge using a neutral detergent.

There are no problems with slicing our sponges. Nevertheless, when slicing a sponge, take care not to leave score lines where the sponge could tear apart easily.

We can do that. Apart from the product price, printing costs and impression costs apply. For price, delivery date, and how to purchase when printing is included, please inquire with sales at Aion.

As shown in the illustration, if you press with your thumb on the midportion of the case in its area of contact with the lid, the lid will be easy to take off.

Employing bleach is possible if you ensure the bleach is at a concentration in line with how your bleach should be used. Since bleaching can cause the product to deteriorate, rinse it out well afterwards.

Soak the product fully with moisture under running water, squeeze it out by hand, and repeat five times.

Our products have a "60°C heat-withstanding temperature," but if you use hot water on them, realistically speaking we recommend "around 40°C."

Load More

Page top