AION Co.,Ltd.

Products ConsumablesWashing, Cleaning

Bristly Mitten Cloth & Fluffy Mitten Cloth

Bristly Mitten Cloth & Fluffy Mitten Cloth are mitten-type cloths that can remove hot water scale and soap scum in bathrooms as well as slime and gunk on sinks with water alone.

Bristly Mitten Cloth

  • The edges of the PET films woven into the mitten cloth scrape off hot water scale and soap scum on bathroom floors and walls, bathtubs, and bath chairs without scratching.
  • To ensure thorough cleaning, the cloth fits into any curved surface, including faucets, shower hoses, tubs, and small articles.

Fluffy Mitten Cloth

  • The soft polyester fibers gently trap slime and gunk on all parts of sinks, mirrors, faucets, and bathtub covers.
  • The bundled heat-fused polyester fibers peel off dirt, and then the entangled loop polyester fibers trap it.

1. Bristly Mitten Cloth

  • Materials: PET film, polyester, cotton
  • Size: approx.190x110mm
  • Quantity: 1 sheet/bag
  • Color: Orange
  • Item No.: 811-O
  • JAN code: 4540104281159

2. Fluffy Mitten Cloth

  • Materials: Heat-fused polyester, polyester, cotton
  • Size: approx.190x110mm
  • Quantity: 1 sheet/bag
  • Color: Green
  • Item No.: 812-G
  • JAN code: 4540104281241

  • Before use, wet this product with water. Wear it over your hand or fold it in half depending on the usage location. You can also use it for spot cleaning.
  • Apply Super-absorbent Sponge 200 ml (Item No.: 613-B, sold separately) onto this product to enable cleaning with only the sponge’s water.
  • Dip the sponge in water before using it with this product.
  • You can use the sponge to wipe off any water that has splashed in bathrooms, washroom sinks, and kitchens. To remove water, wring the sponge out well and then slide it slowly over the surface.

  • Use this product only for its intended purpose.
  • Do not use the product while foreign materials (e.g., hard dust) have adhered to it. Doing so may lead to scratching.
  • It may be difficult to completely remove dirt that has accumulated for many years or dirt and mold that have penetrated into walls.
  • Leaving the cloth dirty leads to mold and other problems. After use, rinse it well and dry it.
  • For fragile objects and glossy materials, try using the cloth on an obscure part first to check for scratches.
  • Do not use the cloth on rough surfaces or pointed objects because the fibers may get caught and fray.
  • Do not put the cloth in hot water or leave it in any place where it may be subject to high temperatures or direct sunlight.
  • For disposal, treat it as a combustible according to the procedure specified by your municipality.

FAQs REGARDING OUR CONSUMABLES

Soaking the sponges in water, or if possible lukewarm water, will bring them back to their original softness.

The dealership or retailer selling your Aion products will differ depending on your product use. Please inquire by telephone or via the inquiry page on Aion's website. A sales representative from the relevant business division will get in touch with you.

That depends on how frequently the products are used. If you use a PLAS CHAMOIS product on almost a daily basis, we think it's fine to leave it moistened, but if you aren't going to be using a PLAS CHAMOIS for more than several days, squeeze the water out well, leave the product to dry naturally, and then keep it stored. Keeping a PLAS CHAMOIS product stored moistened can lead to its molding and mildewing.

When moistened in water, our PVA sponge products are soft to the touch and demonstrate advanced moisture-absorbing functionality. For that reason, we offer our PVA sponge products treated with a mold-and-mildew blocker and packaged in the moistened state.
(Though the sponge products become hard when dried, wetting them again will put them back to normal.)

There are no problems with using your washing machine on PLAS CHAMOIS.

Put Sponge-chiefs in a net and there will be no problems with using your washing machine on them.

Use either an oxygen (non-chlorine) bleach or a chlorine bleach on the mold/mildew, ensuring the bleach is at a concentration in line with how bleach should be used, and afterwards rinse out the sponge item with plenty of water. This will not, however, be effective on all mold/mildew stains.

Rub-and-squeeze wash your sponge in water, or rub-and-squeeze wash your sponge using a neutral detergent.

There are no problems with slicing our sponges. Nevertheless, when slicing a sponge, take care not to leave score lines where the sponge could tear apart easily.

We can do that. Apart from the product price, printing costs and impression costs apply. For price, delivery date, and how to purchase when printing is included, please inquire with sales at Aion.

As shown in the illustration, if you press with your thumb on the midportion of the case in its area of contact with the lid, the lid will be easy to take off.

Employing bleach is possible if you ensure the bleach is at a concentration in line with how your bleach should be used. Since bleaching can cause the product to deteriorate, rinse it out well afterwards.

Soak the product fully with moisture under running water, squeeze it out by hand, and repeat five times.

Our products have a "60°C heat-withstanding temperature," but if you use hot water on them, realistically speaking we recommend "around 40°C."

Load More

Page top