- Its good resilient body comprised of coarse pores enables the wax to spread smoothly, achieving a thin and even finish.
- Before use, let the sponge absorb a small amount of water to soften it.
Products
ConsumablesCoating
Search by application or purposeSearch for the best product based on the criteria you are looking for.
Close
Reset
- Home
- Products
- Consumables
- Car care Coating
- WAX Sponge
WAX Sponge
Wax Sponge employs the same material as powder puffs, making it gentle on car bodies, and provides a uniform finish.
Material, Item No., Size, Quantity, Color,
Material
Polyvinyl Alcohol, Polyester
Size
approx.110x80x35mm(Oval shape)
Color
Yellow
Q'tty
1 sheet/pack
Item No., Color
503-Y
JAN code
4905489950333
Instructions:
- Before wax application, be sure to wash the car and wipe off any water on the car body surface.
- After dipping the sponge in water, wring it out well and use it while it is in a soft state.
- Apply the wax by thinly spreading a dab of it over a small area.
- Spreading the wax in a circle increases the risk of an uneven finish. Make linear movements when using the sponge.
Notes:
- Use this product only for its intended purpose.
- The isothiazolinone preservative contained in this product may cause allergic contact dermatitis.
- Before first use, be sure to rinse the cloth in water well.
- Scratching may occur when using the sponge while sand, dust, or other particles have adhered to it or the car body surface as well as when scraping with too much force.
- Before use, be sure to remove any particles that have adhered, such as sand and dust.
- The sponge hardens upon drying. Before use, be sure to dip the sponge in (warm) water to soften it and then wring it out well. Softening may take several minutes.
- Leaving the sponge dirty leads to mold and other problems. After use, rinse it well and wring it out, and then put it into the dedicated bag. Or, when you will not use the sponge for an extended period of time, store it in a dry state.
- If the product becomes soiled, wash it by hand with neutral detergent. Rinse it well so that no detergent remains.
- Do not use bleach because it may cause the material to deteriorate.
- Do not put the sponge in hot water or leave it in any place where it may be subject to high temperatures or direct sunlight.
- For disposal, treat it as a combustible according to the procedure specified by your municipality.
FAQs REGARDING OUR CONSUMABLES
Soaking the sponges in water, or if possible lukewarm water, will bring them back to their original softness.
The dealership or retailer selling your Aion products will differ depending on your product use. Please inquire by telephone or via the inquiry page on Aion's website. A sales representative from the relevant business division will get in touch with you.
That depends on how frequently the products are used. If you use a PLAS CHAMOIS product on almost a daily basis, we think it's fine to leave it moistened, but if you aren't going to be using a PLAS CHAMOIS for more than several days, squeeze the water out well, leave the product to dry naturally, and then keep it stored. Keeping a PLAS CHAMOIS product stored moistened can lead to its molding and mildewing.
b
I bought an Aion product, and when I took it out of the package, it was wet. Is that the way it is?
When moistened in water, our PVA sponge products are soft to the touch and demonstrate advanced moisture-absorbing functionality. For that reason, we offer our PVA sponge products treated with a mold-and-mildew blocker and packaged in the moistened state.
(Though the sponge products become hard when dried, wetting them again will put them back to normal.)
There are no problems with using your washing machine on PLAS CHAMOIS.
Put Sponge-chiefs in a net and there will be no problems with using your washing machine on them.
Use either an oxygen (non-chlorine) bleach or a chlorine bleach on the mold/mildew, ensuring the bleach is at a concentration in line with how bleach should be used, and afterwards rinse out the sponge item with plenty of water. This will not, however, be effective on all mold/mildew stains.
Rub-and-squeeze wash your sponge in water, or rub-and-squeeze wash your sponge using a neutral detergent.
There are no problems with slicing our sponges. Nevertheless, when slicing a sponge, take care not to leave score lines where the sponge could tear apart easily.
We can do that. Apart from the product price, printing costs and impression costs apply. For price, delivery date, and how to purchase when printing is included, please inquire with sales at Aion.
As shown in the illustration, if you press with your thumb on the midportion of the case in its area of contact with the lid, the lid will be easy to take off.
Employing bleach is possible if you ensure the bleach is at a concentration in line with how your bleach should be used. Since bleaching can cause the product to deteriorate, rinse it out well afterwards.
Soak the product fully with moisture under running water, squeeze it out by hand, and repeat five times.
Our products have a "60°C heat-withstanding temperature," but if you use hot water on them, realistically speaking we recommend "around 40°C."
Load More
Inquiries about this product
