AION Co.,Ltd.

Products ConsumablesWasing Wiping

PlAS SENU Premium Dual Chamois Cloth

PLAS SENU Premium Dual Chamois Cloth is a car washing cloth that integrates a super-absorbent synthetic chamois with a microfiber cloth, allowing one sheet to be used for water washing, water wiping after washing, and coat wiping.
  • The microfiber cloth wipes off water, and then the super-absorbent synthetic chamois strongly lifts it up to assist in absorption.
  • When used for coat wiping with simple coatings, the product achieves a uniform finish while absorbing water.
  • Uses made-in-Japan materials for both surfaces (super-absorbent synthetic chamois and microfiber cloth).

Material

  • Chamois : Polyvinyl Alcohol, Polyester
  • Microfiber cloth : Polyester/Nylon

Size

approx.430x325mm

Color

Yellow

Q'tty

1 sheet/pack

Item No., Color

916-Y

JAN code

4540104091635

– Before use, dip the cloth in water to soften it, and wring it out tightly.

Water washing

  • Before use, use water to rinse off any dirt, abrasive dust, and other particles that have adhered to the car body and window glass.
  • Let the cloth absorb plenty of water for washing.

Water wiping

  • During washing, rinse off any dirt, sand, and other particles.
  • Repeatedly perform the “wipe and then wring” cycle during wiping work. Wringing out the cloth restores its absorbency.

Coat wiping (we recommend using water-soluble coatings that only require spraying and wiping)

  • During washing, rinse off any dirt, sand, and other particles.
  • Spray the coating while the body is wet, and then wipe off the coating together with any water droplets.

* Perform coating work according to the coating manufacturer’s instructions and procedures.
* After use, be sure to rinse off any coating material that has adhered to the product with neutral detergent. Leaving adhered coating material as is may reduce water absorption performance.

  • The isothiazolinone preservative contained in the product may cause allergic contact dermatitis.
    Before first use, be sure to rinse the cloth in water well.
  • Use this product only for its intended purpose.
  • Do not use the cloth on a car after driving for a long time or in a state in which the body is heavily soiled.
  • Before first use, rinse the cloth in water because it may generate cutting or sewing lint.
  • The synthetic chamois hardens upon drying. Before use, dip the cloth in (warm) water to soften it, and wring it out well.
  • Before use, rinse off any dirt that has adhered to the car body or other surfaces.
  • Leaving dirt and stains adhering to the cloth leads to mold and other problems. After use, rinse the cloth well, wring it dry, and then store it.
  • If the cloth becomes heavily soiled, use soap or neutral detergent to clean it. Do not use bleach because doing so may cause the material to deteriorate.
  • Do not put the cloth in hot water or leave it within the reach of infants or in any place where it may be subject to high temperatures or direct sunlight.
  • For disposal, treat it as a combustible according to the procedure specified by your municipality.
  • Please note that when dipped in water, the product deforms due to its characteristics after dimensional changes.
  • The chamois surface may get creases and the like, but this will not affect performance.

FAQs REGARDING OUR CONSUMABLES

Soaking the sponges in water, or if possible lukewarm water, will bring them back to their original softness.

The dealership or retailer selling your Aion products will differ depending on your product use. Please inquire by telephone or via the inquiry page on Aion's website. A sales representative from the relevant business division will get in touch with you.

That depends on how frequently the products are used. If you use a PLAS CHAMOIS product on almost a daily basis, we think it's fine to leave it moistened, but if you aren't going to be using a PLAS CHAMOIS for more than several days, squeeze the water out well, leave the product to dry naturally, and then keep it stored. Keeping a PLAS CHAMOIS product stored moistened can lead to its molding and mildewing.

When moistened in water, our PVA sponge products are soft to the touch and demonstrate advanced moisture-absorbing functionality. For that reason, we offer our PVA sponge products treated with a mold-and-mildew blocker and packaged in the moistened state.
(Though the sponge products become hard when dried, wetting them again will put them back to normal.)

There are no problems with using your washing machine on PLAS CHAMOIS.

Put Sponge-chiefs in a net and there will be no problems with using your washing machine on them.

Use either an oxygen (non-chlorine) bleach or a chlorine bleach on the mold/mildew, ensuring the bleach is at a concentration in line with how bleach should be used, and afterwards rinse out the sponge item with plenty of water. This will not, however, be effective on all mold/mildew stains.

Rub-and-squeeze wash your sponge in water, or rub-and-squeeze wash your sponge using a neutral detergent.

There are no problems with slicing our sponges. Nevertheless, when slicing a sponge, take care not to leave score lines where the sponge could tear apart easily.

We can do that. Apart from the product price, printing costs and impression costs apply. For price, delivery date, and how to purchase when printing is included, please inquire with sales at Aion.

As shown in the illustration, if you press with your thumb on the midportion of the case in its area of contact with the lid, the lid will be easy to take off.

Employing bleach is possible if you ensure the bleach is at a concentration in line with how your bleach should be used. Since bleaching can cause the product to deteriorate, rinse it out well afterwards.

Soak the product fully with moisture under running water, squeeze it out by hand, and repeat five times.

Our products have a "60°C heat-withstanding temperature," but if you use hot water on them, realistically speaking we recommend "around 40°C."

Load More

Page top